| Block name | Designation | Field of application | Defects parameters | Roughness of operating surface, µm | Overall dimensions | Material | NOTE | |||
| Length, mm |
Width, mm | Depth, mm | ||||||||
| SOP UK |
Intended for setting-up the VD-132-K-IIIU-OKO-01 flaw detector | Aircraft industry | 1.27 | 0.127 | 0.635 | Rа 1.25 | 140 х 120 х 80 | Part of aircraft wheel hub | Test block for wheels testing manufactured by: Honeywell, Goodrich, ABSC |
|
| SOP TVK B- 1,2,3 |
Intended for setting-up the VD3-81 Eddycon, VD-132-K-IIIU-ОКО-01 |
Aircraft industry | 1.6 | 0.15 | 0.3 | Rа 1.25 | 150 х 130 х100 | Part of aircraft wheel hub | Test block for wheels testing, manufactured by Honeywell, Goodrich, ABSC |
|
| SOP OF-1 В95 | Intended for setting-up the VD3-81 Eddycon,VD-132-K-IIIU-ОКО-01 | Aircraft industry | 3.0 | 0.13 | 0.7 | Rа 1.25 | 162 × 16 × 51 | B95 aluminum alloys |
Test block for Boeing and McDonnell Douglas aircrafts testing |
|
| 4.65 | 0.7 | |||||||||
| 25.4 | 0.7; 1.2 | |||||||||
| 3.18 | 0.7 | |||||||||
| 1.5 | 0.7 | |||||||||
| 2.8 | 0.7 | |||||||||
| 4.1 | 0.7 | |||||||||
Calibration Blocks for Surface Defects Detection (Irregular Shape)
-
font size
decrease font size
increase font size
Calibration blocks for surface defects detection (of irregular shape)
Published in
Eddy-current Calibration Blocks