Main specifications
The set consists of two calibration blocks: MD 2-0-1 and MD 2-0-2. The blocks from KMD 2-0 set are based on 40Х13 steel plate. They contain artificial reflectors such as side drilled holes diam. 1.6 mm (for MD2-0-1) or 1.0 mm (for MD2-0-2) that are located at the depth from 0.5 mm to 50 mm.
Main specifications of these calibration blocks are listed in the Table below:
| Parameters | MD 2-0-1 | MD 2-0-2 |
| Length, mm | 400 | |
| Height, mm | 100 | |
| Thickness, mm | 30 | 25 |
| Diameter of reflectors, mm | 1,6 | 1,0 |
| Occurrence depth of reflectors, mm | 0,5 - 50 | |
| Dynamic range of longitudinal ultrasonic waves, dB | 1 ± 0,3 | |
| Frequency, MHz | 10 | |
| Velocity of propagation of longitudinal ultrasonic waves, m/s | 6030 ± 30 | |