| Block name | Designation | Application field |
Defects parameters | Roughness of operating surface, µm | Overall dimensions | Material | Note | ||
| Length, mm | Width, mm | Depth, mm | |||||||
| KSOP2353.12 | Intended for setting-up the VD3-81 Eddycon flaw detector during carrying out the holes testing using eddy current rotary scanner | Aircraft, power, transportation, engineering industries. | 10 | 0.15 | 0.5 | Rа 0.63 | 150 × 50 × 10 | alloy D16Т | Test block is intended for testing the bolt and rivet holes or aircraft parts |
| 0.76 | 0.1 | 0.76 | Rа 0.63 | ø 24 × 10 | alloy D16Т | ||||
Calibration Blocks for Holes Testing
-
font size
decrease font size
increase font size
Calibration blocks for holes testing
Published in
Eddy-current Calibration Blocks