The set of calibration blocks KMD 2-0 is intended for measuring the parameters of ultrasonic pulse flaw detectors as per GOST 23667.
The calibration blocks are intended for measuring the parameters of ultrasonic pulse flaw detectors as per GOST 23667.
SO-3R calibration block (as per GOST 18576-85) made from 20 steel grade according to GOST 1050 is intended for calibration of ultrasonic flaw detectors during ultrasonic testing.
Set of ultrasonic thickness calibration blocks KUSOT-180 is intended for examination and for initial inspection at manufacturing plants of ultrasonic contact thickness gauges, operating in a thickness range 0.2…300 mm on steel, 1…300 mm on duraluminium and 1…100 mm on brass and for periodic verification of such thickness gauges.
Increasing requirements for the quality and safety of industrial equipment, the need to check its condition without taking it out of service made the countries of Eastern Europe paying more attention to the non-destructive testing issues.Aimed at exchanging experience, discussions, studying of the latest methods and developments the local and regional forums are held. One of such events became the 47th NDT Exhibition and Conference in Poland – the KKBN-2018, in which, by invitation from our Polish partner PCB Service company, the representatives of the RPC ULTRACON-SERVICE as a part of OKOndt GROUP™ took part.
Long Beach, CA 24-27 October 2016