Ultrasonic Calibration Block V2

font size decrease font size increase font size
Print
Email

Calibration block V2 is intended for calibratio of ultrasonic flaw detectors during ultrasonic testing of welded joints quality and corresponds to DSTU 4002-2000 (ISO 2400, DIN 54120, B. S. 2704).

Calibration block V2 allows to:

Calibrate the flaw detector sweep by sound velocity during operation with straight-beam probes;
calibrate the flaw detector sweep by sound velocity during operation with angle-beam probes;
set the conditionall sensitivity level of ultrasonic flaw detectors with straight- and angle-beam probes;
determine the sound waves index point and x-value of angle-beam probes;
determine the probe angle of sound waves in steel.

Specifications

Longitudinal waves sound velocity in the calibration block material at frequency 5.0 MHz and temperature (20±5) 0 С equals (5920±30) m/s.
Shear waves sound velocity in the block material at a frequency 5.0 MHz and temperature (20±5) 0 С equals (3255±15) m/s.
Calibration block geometrical dimensions correspond to DSTU 4002-2000 (ISO 2400, DIN 54120, B. S. 2704).

Published in Ultrasonic Calibration Blocks

More in this category: « Ultrasonic Calibration Block V1 Calibration Blocks with Notches »

LATEST NEWS

ULTRACON-SERVICE grieves on Borys Paton death

On 19 August 2020, our esteemed fellow countryman, brilliant scientist, academician Borys Paton died, at 101.

OKO Association’s new website

A few decades ago, within first years of its establishment, ULTRACON-SERVICE, SPE didn’t set a task to supply its own-made equipment outside of borders of the native lands. Nowadays, being part of OKO Association, we cooperate with many countries around the world, and this year we plan to expand our business contacts list with the companies from Southeast Asia. OKO Association has recently opened a website www.okondt.cn for this region, and now the information about equipment produced by our company is available in Chinese.

Resilient packaging for single rail trolleys transportation and storage!

A lot of products developed by the RPC “Ultracon-Service” cover hundreds and even thousands of kilometers before they reach the customer’s site. Transportation of the equipment is carried out by the overland or air transport. The equipment is thoroughly checked before shipment, and it is important for us to be totally sure that each device will be delivered to the customer in the same condition in which it left our site.

Research and Production Company ULTRACON-SERVICE at Polish Conference and Exhibition KKBN-2018

Increasing requirements for the quality and safety of industrial equipment, the need to check its condition without taking it out of service made the countries of Eastern Europe paying more attention to the non-destructive testing issues.Aimed at exchanging experience, discussions, studying of the latest methods and developments the local and regional forums are held. One of such events became the 47th NDT Exhibition and Conference in Poland – the KKBN-2018, in which, by invitation from our Polish partner PCB Service company, the representatives of the RPC ULTRACON-SERVICE as a part of OKOndt GROUP™ took part.